Lubricants, Fluids, Sealers and Adhesives
Specifications
Motorcraft® MERCON® LV Automatic Transmission Fluid XT-10-QLVC
MERCON® LV
If the transmission fluid does not drain from the oil
leveling plug hole, add transmission fluid in increments of 0...
Other information:
Note: To remove push pins, use a
flat-bladed screwdriver to pull up the center
release pin.
Make sure the headlamp control is in
the off position and open the hood.
Remove the six push pins securing the
front fascia to the front trim cover.
Remove the three bumper cover upper
screws using a flat-bladed screwdriver...
Special Tool(s) /
General Equipment
Interior Trim Remover
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
If installing a new module, it is necessary to
upload the module configuration information to the scan tool prior to
removing the module...