Ford Fusion Manuals

Ford Fusion: Seats / Memory Function

WARNING: Before activating the memory seat, make sure that the area immediately surrounding the seat is clear of obstructions and that all occupants are clear of moving parts.

WARNING: Do not use the memory function when your vehicle is moving.

This feature recalls the position of the following features:

  • Driver seat.
  • Power mirrors.

The memory control is on the driver door.

Ford Fusion. Memory Function

Saving a PreSet Position

  1. Adjust the memory features to the position you prefer.
  2. Press the SET button until you hear a single tone.
  3. Press the preset button you prefer until you hear a single tone.

You can save up to two preset memory positions. You can save a memory preset at any time.

Recalling a PreSet Position

Press and release the preset button associated with the driving position you prefer. The memory features move to the position stored for that preset.

Note: You can only recall a preset memory position when you switch the ignition off, or when the transmission is in park (P) or neutral (N) if the ignition is on and the vehicle is not moving.

You can also recall a preset memory position by:

  • Pressing the unlock button on your intelligent access key fob if it is linked to a preset position.
  • Unlocking the intelligent driver door handle if a linked key fob is present.

Note: Using a linked key fob to recall your memory position when the ignition is off moves the seat to the Easy Entry position.

Note: Pressing any active memory feature control or any memory button during a memory recall cancels the operation.

Linking a PreSet Position to your Remote Control or Intelligent Access Key Fob

Your vehicle can save the preset memory positions for up to two remote controls or intelligent access keys.

After you save the memory preset positions you prefer:

  1. Press and hold the preset button you prefer for about three seconds until you hear a single tone.
  2. Within three seconds, press the lock button on the remote control you are linking.

To unlink a remote control, follow the same procedure – except in step 2, press the unlock button on the remote control.

Note: If more than one linked remote control or intelligent access key is in range, the memory function moves to the settings of the first key to initiate a memory recall.

Easy Entry and Exit Feature

If you enable the easy entry and exit feature, it moves the driver seat position rearward up to 2 in (5 cm) when you switch the ignition off.

The driver seat returns to the previous position when you switch the ignition on. You can enable or disable this feature through the information display.

    Power Seats (IF EQUIPPED)

    WARNING: Do not adjust the driver seat or seatback when your vehicle is moving. WARNING: Do not place cargo or any objects behind the seatback before returning it to the original position...

    Rear Seats

    Note: Your vehicle may have split seatbacks that you must fold individually. Note: Make sure the center safety belt is unbuckled before folding the seatback...

    Other information:

    Ford Fusion 2013–2020 Service Manual: Pinpoint Test - DTC: I. Diagnosis and Testing

    B0052:11, B0052:12, B0052:13 and B0052:1D Refer to Wiring Diagrams Cell 46 for schematic and connector information. Normal Operation and Fault Conditions The RCM monitors the passenger seatbelt buckle switch circuits for the following faults: Open circuit Short to voltage Short to ground Current out of range Faulted passenger seatbelt buckle switch ..

    Ford Fusion 2013–2020 Service Manual: Power Transfer Unit Draining and Filling. General Procedures

    Materials Name Specification Motorcraft® SAE 75W-140 Synthetic Rear Axle LubricantXY-75W140-QL WSL-M2C192-A  Draining With the vehicle in NEUTRAL, position it on hoist. Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation). If equipped. Remove the retainers and the underbody shield. ..


    Understanding Your Tire Pressure Monitoring System

    Ford Fusion. Understanding Your Tire Pressure Monitoring System

    The tire pressure monitoring system measures pressure in your road tires and sends the tire pressure readings to your vehicle. You can view the tire pressure readings through the information display. The low tire pressure warning light will turn on if the tire pressure is significantly low. Once the light is illuminated, your tires are under-inflated and need to be inflated to the manufacturer’s recommended tire pressure. Even if the light turns on and a short time later turns off, your tire pressure still needs to be checked.

    read more

    Copyright © 2022