Ford Fusion: Automatic Transmission - 6-Speed Automatic Transmission – 6F35 / Output Shaft Speed (OSS) Sensor. Removal and Installation
Removal
-
Remove the main control valve body.
Refer to: Main Control Valve Body (307-01A Automatic Transmission - 6-Speed Automatic Transmission – 6F35, Removal and Installation).
-
Remove the OSS sensor bolt and the OSS sensor.
Torque:
89 lb.in (10 Nm)
Installation
-
To install, reverse the removal procedure.
Removal
Remove the main control cover.
Refer to: Main Control Cover - 2.0L EcoBoost (184kW/250PS) – MI4 (307-01A Automatic Transmission - 6-Speed Automatic Transmission – 6F35, Removal and Installation)...
Removal
With the vehicle in NEUTRAL, position it on a hoist.
Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation)...
Other information:
System Operation
System Diagram
Network Message Chart
Module Network Input Messages Powertrain Control Module (PCM)
Broadcast Message
Originating Module
Message Purpose
Ignition status
BCM
Provides the PCM with ignition mode...
Special Tool(s) /
General Equipment
Interior Trim Remover
Removal
NOTE:
It is not necessary to carry out a PMI when installing a new GSM unless specifically instructed to do so in a TSB, GSB, FSA or SSM.
NOTE:
Removal steps in this procedure may contain installation details...