Ford Fusion: Climate Control System / Climate Control System - General Information

Ambient Air Temperature Sensor. Removal and Installation

Removal NOTE: Removal steps in this procedure may contain installation details. All vehicles With the vehicle in NEUTRAL, position it on a hoist...

Air Conditioning (A/C) Compressor - 1.5L EcoBoost (118kW/160PS) – I4. Removal and Installation

Removal NOTICE: During the removal or installation of components, cap, tape or otherwise appropriately protect all openings and tubes/fittings to prevent the ingress of dirt or other contamination...

Other information:

Ford Fusion 2013–2020 Service Manual: Transmission Case Reseal. General Procedures

Special Tool(s) / General Equipment 100-001 (T50T-100-A) Slide Hammer 205-153 (T80T-4000-W) Handle 205-990Installer, Axle SealTKIT-2012A-FLTKIT-2012A-ROW 303-D011 (D80L-100-G) Actuator Pin (Dia 3/16) 303-D019 (D80L-100-Q) Collet, 3/4 to 7/8 307-003 (T57L-500-B) Holding Fixture, Transmission 307-091Handle, Torque ConverterTKIT-2009TC-F ..

Ford Fusion 2013–2020 Service Manual: Light Emitting Diode (LED) Control Module. Removal and Installation

Removal All vehicles Remove the headlamp assembly. Refer to: Headlamp Assembly (417-01 Exterior Lighting, Removal and Installation). Vehicles with Light Emitting Diode headlamps Remove the screws and the LED control module. Vehicles with Halogen Light Emitting Diode enhanced headlamps Remove the screws and the LED control module...