Ford Fusion: Body and Paint / Handles, Locks, Latches and Entry Systems

Overhead Console. Removal and Installation

Removal NOTE: Removal steps in this procedure may contain installation details. NOTE: Consoles look different depending on option level. Insert trim tool in location(s) shown...

Handles, Locks, Latches and Entry Systems - Overview. Description and Operation

Overview The power lock/unlock feature locks or unlocks the doors upon a customer request from a door lock control switch, the keyless entry keypad (if equipped), the passive entry system (if equipped) or a RKE transmitter...

Other information:

Ford Fusion 2013–2020 Service Manual: Rocker Panel. Removal and Installation

Special Tool(s) / General Equipment Resistance Spotwelding Equipment Hot Air Gun 8 mm Drill Bit MIG/MAG Welding Equipment Spot Weld Drill Bit Locking Pliers Materials Name Specification Metal Bonding AdhesiveTA-1, TA-1-B, 3M™ 08115, LORD Fusor® 108B -  Seam SealerTA-2-B, 3M™ 08308, LORD Fusor® 803DTM -  Removal NO..

Ford Fusion 2013–2020 Service Manual: Ignition Coil-On-Plug. Removal and Installation

Removal NOTE: Removal steps in this procedure may contain installation details. NOTE: Use compressed air to remove any foreign material from the ignition coil-on-plugs and surrounding area before removing the ignition coil-on-plugs. NOTE: When removing the ignition coil-on-plugs, a slight twisting motion will break the seal and ease removal. Detach the wiring harnes..