Other information:
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Open the console.
On both sides.
Detach the clips and remove the floor console upper side finish panels.
Detach the clips and remove the instrument panel center finish panel.
Remove the screws, detach the cl..
Line Pressure Test
NOTE:
Perform the line pressure test prior to performing the stall
speed test. If the line pressure is low at stall, do not perform the
stall speed test or transmission damage will occur. Do not maintain WOT in any transmission range for more than 5 seconds.
This test verifies the line pressure is within specification.
Remove the 2 bolts and position aside the air..