Ford Fusion: Engine System - General Information / Specifications

Ford Fusion 2013–2020 Service Manual / Powertrain / Engine / Engine System - General Information / Specifications

Materials

Item	Specification
Dye-Lite® Gasoline Engine Oil Leak Detection Dye 164-R3700 (Rotunda)	-

Engine System - General Information

Engine - Overview. Description and Operation

Engine Information NOTE: When repairing engines, all parts must be contamination free. If contamination/foreign material is present when repairing an engine, premature engine failure may occur...

Other information:

Ford Fusion 2013–2020 Service Manual: Camshaft Position (CMP) Sensor RH. Removal and Installation

Removal NOTE: Removal steps in this procedure may contain installation details. Remove the engine appearance cover. Disconnect the CMP sensor electrical connector, remove the retainer and the CMP sensor. Torque: 80 lb...

Ford Fusion 2013–2020 Service Manual: Driveshaft. Diagnosis and Testing

Preliminary Inspection Visually inspect the CV joints for obvious signs of mechanical damage. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step If the cause is not visually evident, verify the symptom and REFER to Symptom Chart: NVH...

Understanding Your Tire Pressure Monitoring System

Ford Fusion. Understanding Your Tire Pressure Monitoring System

The tire pressure monitoring system measures pressure in your road tires and sends the tire pressure readings to your vehicle. You can view the tire pressure readings through the information display. The low tire pressure warning light will turn on if the tire pressure is significantly low. Once the light is illuminated, your tires are under-inflated and need to be inflated to the manufacturer’s recommended tire pressure. Even if the light turns on and a short time later turns off, your tire pressure still needs to be checked.