Ford Fusion: Engine / Engine Cooling - 1.5L EcoBoost (118kW/160PS) – I4

Engine. Installation

S..

Specifications

  Lubricants, Fluids, Sealants and Adhesives Vehicles Built On Or Before: 31-December-2019 Name Fill Capacity   Material: Motorcraft® Orange Concentrated Antifreeze/Coolant / VC-3-B (WSS-M97B44-D)   10...

Other information:

Ford Fusion 2013–2020 Service Manual: Factory Mode Deactivation. General Procedures

Deactivation NOTE: During vehicle build, some modules, such as the IPC and BCM module are set in factory mode. Factory mode reduces the drain on the battery during longer periods where the vehicle is not used. While in the factory mode, various systems may be altered or disabled and the IPC displays FACTORY MODE CONTACT DEALER in the message center...

Ford Fusion 2013–2020 Owners Manual: Removing a Headlamp

Note: To remove push pins, use a flat-bladed screwdriver to pull up the center release pin. Make sure the headlamp control is in the off position and open the hood. Remove the six push pins securing the front fascia to the front trim cover. Remove the three bumper cover upper screws using a flat-bladed screwdriver...