Ford Fusion: Engine Cooling - 1.5L EcoBoost (118kW/160PS) – I4 / Specifications
Ford Fusion 2013–2020 Service Manual / Powertrain / Engine / Engine Cooling - 1.5L EcoBoost (118kW/160PS) – I4 / Specifications
Lubricants, Fluids, Sealants and Adhesives Vehicles Built On Or Before: 31-December-2019
| Name | Fill Capacity |
| Material: Motorcraft® Orange Concentrated Antifreeze/Coolant / VC-3-B (WSS-M97B44-D) | 10.88 qt ( 10.3 L) |
| Material: Motorcraft® Orange Prediluted Antifreeze/Coolant / VC-3DIL-B (WSS-M97B44-D2) | 10.88 qt ( 10.3 L) |
Lubricants, Fluids, Sealants and Adhesives Vehicles Built On Or After: 01-January-2020 and all service
| Name | Fill Capacity |
| Material: Motorcraft® Yellow Concentrated Antifreeze/Coolant / VC-13-G (WSS-M97B57-A1) | 10.88 qt ( 10.3 L) |
| Material: Motorcraft® Yellow Prediluted Antifreeze/Coolant / VC-13DL-G (WSS-M97B57-A2) | 10.88 qt ( 10.3 L) |
| Material: Motorcraft® Premium Cooling System Flush / VC-1 (ESR-M14P7-A) | – |
Antifreeze
| Percent Antifreeze/Coolant to Distilled Water | Freeze Protection |
|---|---|
| 42/58 | -14.8 °F ( -26 °C) |
| 58/42 (Extreme Cold Climates) | -57.9 °F ( -50 °C) |
Cooling System Pressure
| Cooling system pressure test | 124 - 138 kPa (18 - 20 PSI) |
| Radiator pressure test (removed from vehicle) | 138 kPa (20 psi) |
| Auxiliary Radiator (removed from vehicle) | 138 kPa (20 psi) |
Thermostat Opening Temperatures
| Starts to open | 82C (180F) |
| Fully open | 97C (207F) |
Engine Cooling - Component Location. Description and Operation
Item
Part Number
Description
1
81008100
Pressure relief cap
2
8A0808A080
Degas bottle
3
8A3658A365
Degas bottle-to-engine hose
4
60906090
Cylinder head
5
76107610
Cylinder head tube
6
18C26618C266
Heater hose assembly
7
18B53918B539
Heater core
8
7G0717G071
Transmission warmer inlet hose
9
1..
Other information:
Ford Fusion 2013–2020 Service Manual: Spring Lock Couplings. General Procedures
Special Tool(s) / General Equipment 310-250Disconnect Tool, Fuel LineTKIT-2012A-FLTKIT-2012A-ROW Disconnect NOTICE: When reusing liquid or vapor tube connectors, make sure to use compressed air to remove any foreign material from the connector retaining clip area before separating from the tube or damage to the tube or connector retaining clip can occur. Apply clean engine oil ..
Ford Fusion 2013–2020 Service Manual: C-Pillar Side Impact Sensor. Removal and Installation
Removal NOTE: Removal steps in this procedure may contain installation details. WARNING: Turn the ignition OFF and wait one minute to deplete the backup power supply. Ignition must remain OFF until repair is complete. Failure to follow this instruction may result in serious personal injury or death in the event of an accidental deployment. If installing a new component ..
Categories
- Manuals Home
- 2nd Generation Ford Fusion Owners Manual
- 2nd Generation Ford Fusion Service Manual
- Main Control Valve Body. Removal and Installation
- Engine
- Automatic Transmission Fluid Check - 1.5L EcoBoost™/2.0L EcoBoost™/2.5L. Automatic Transmission Fluid Check - 2.7L EcoBoost™
- New on site
- Most important about car
Direction Indicators. Interior Lamps
Direction Indicators
Push the lever up or down to use the direction indicators.
Copyright © 2026 www.fofusion2.com