Ford Fusion: Steering System / Steering Wheel and Column Electrical Components

Steering Column Tilt Motor. Removal and Installation

Removal NOTE: Removal steps in this procedure may contain installation details. Remove the steering column shrouds. Refer to: Steering Column Shrouds (501-05 Interior Trim and Ornamentation, Removal and Installation)...

Steering Wheel and Column Electrical Components - Overview. Description and Operation

Steering Column Switches Overview The steering column switches are located on and around the steering column. This enables the driver to control various vehicle functions and remain focused on driving...

Other information:

Ford Fusion 2013–2020 Service Manual: Rear Lamp Mounting Panel. Removal and Installation

Special Tool(s) / General Equipment Hot Air Gun 8 mm Drill Bit MIG/MAG Welding Equipment Spot Weld Drill Bit Materials Name Specification Seam SealerTA-2-B, 3M™ 08308, LORD Fusor® 803DTM -  Removal   WARNING: Before beginning any service procedure in this section, refer to Safety Warnings in section 100-00 General Information...

Ford Fusion 2013–2020 Owners Manual: Removing a Headlamp

Note: To remove push pins, use a flat-bladed screwdriver to pull up the center release pin. Make sure the headlamp control is in the off position and open the hood. Remove the six push pins securing the front fascia to the front trim cover. Remove the three bumper cover upper screws using a flat-bladed screwdriver...