Ford Fusion: Chassis / Steering System

Anti-Lock Brake System (ABS) Module. Removal and Installation

Removal NOTE: Removal steps in this procedure may contain installation details. NOTE: The ABS module and HCU are released individually. A new ABS module does not come equipped with an HCU...

Power Steering

..

Other information:

Ford Fusion 2013–2020 Service Manual: Battery Monitoring Sensor. Removal and Installation

Removal NOTICE: Do not remove or install the M8 nut (20 Nm) on the cable eyelet bolt while the battery monitoring sensor is attached to the battery post as this causes damage to the sensor, connector, and possibly the battery post and case. Disconnect the battery. Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures). ..

Ford Fusion 2013–2020 Service Manual: Wheel and Tire. Removal and Installation

Materials Name Specification Motorcraft® High Temperature Nickel Anti-Seize LubricantXL-2 -  Removal With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation). NOTICE: Do not use heat to loosen a seized wheel nut or damage to the wheel and wheel bearing can o..