Ford Fusion: Accessory Drive - 1.5L EcoBoost (118kW/160PS) – I4 / Accessory Drive - Component Location. Description and Operation

Accessory Drive - 1.5L EcoBoost (118kW/160PS) – I4

..

Accessory Drive. Diagnosis and Testing

Inspection and Verification Verify the customer concern. Visually inspect for obvious signs of mechanical damage.   Visual Inspection Chart Mechanical Damaged or contaminated accessory drive belt Damaged or contaminated pulley(s) Incorrect accessory drive belt Incorrect fitment of the accessory drive belt Generator ..

Other information:

Ford Fusion 2013–2020 Service Manual: Active Torque Coupling Configuration. General Procedures

Configuration NOTICE: If the ATC (Active Torque Coupling) solenoid bar code information is not correct, Rear Drive Unit (RDU) damage or driveability concerns can occur. Using a diagnostic scan tool, under the toolbox icon select Powertrain then select Automatic Traction Control Barcode Entry. Follow the instructions displayed on the diagnostic scan tool. Enter the 4-d..

Ford Fusion 2013–2020 Service Manual: Camshaft Position (CMP) Sensor RH. Removal and Installation

Removal NOTE: Removal steps in this procedure may contain installation details. Remove the engine appearance cover. Disconnect the CMP sensor electrical connector, remove the retainer and the CMP sensor. Torque: 80 lb.in (9 Nm) Installation To install, reverse the removal procedure. ..