Ford Fusion: Battery and Charging System / Battery, Mounting and Cables

Charging System. Diagnosis and Testing

Inspection and Verification Verify the customer concern by operating the charging system. Before diagnosing or repairing the charging system inspect the following items: Check the battery for loose, damaged or corroded connections...

Specifications

  General Specifications Vehicles with Auto-Start-Stop System Item Specification Voltage 12 V Battery amps rating 70 Ah Cold Cranking Amps (CCA) measured at -18 C (-0...

Other information:

Ford Fusion 2013–2020 Service Manual: Battery. Diagnosis and Testing

General Equipment Diagnostic Battery Charger Use Ford approved battery test equipment. Midtronics MDX-650 or P-300/P-600/490/1050 Midtronics GRX-3590 or 3000 Midtronics EXP-890 Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices...

Ford Fusion 2013–2020 Service Manual: Pinpoint Test - DTC: B. Diagnosis and Testing

B0002:11, B0002:12, B0002:13 and B0002:1A Refer to Wiring Diagrams Cell 46 for schematic and connector information. Normal Operation and Fault Conditions The RCM continuously monitors the driver airbag stage 2 circuits for the following faults: Resistance out of range Unexpected voltage Short to ground Faulted driver airbag If a fault is detected, the RCM..