Ford Fusion: Automatic Transmission / Transmission Cooling - 6-Speed Automatic Transmission – 6F35

Transmission Case. Disassembly and Assembly of Subassemblies

S..

Transmission Cooling - Component Location. Description and Operation

Transmission Cooling - 1.5L EcoBoost Item Description 1 Transmission fluid cooler 2 Transmission fluid cooler coolant hoses 3 Cooler bypass valve 4 Transmission fluid cooler-to-cooler bypass valve tube 5 Cooler bypass valve-to-transmission fluid cooler tube 6 Cooler bypass valve-to-transmission tube 7 Transmission fluid warmer coolant quick c..

Other information:

Ford Fusion 2013–2020 Service Manual: Piston Selection. General Procedures

Check NOTE: Refer to the appropriate Section 303-01 for the specifications. NOTE: The cylinder bore must be within the specifications for taper and out-of-round before fitting a piston. Measure the cylinder bore in 2 directions. Select a piston size based on the cylinder bore. NOTE: For precision fit, new pistons are divided into 3 ..

Ford Fusion 2013–2020 Service Manual: Gateway Module A (GWM). Removal and Installation

Removal NOTE: Removal steps in this procedure may contain installation details. NOTE: If installing a new module, it is necessary to upload the module configuration information to the scan tool prior to removing the module. This information must be downloaded into the new module after installation. Upload the GWM configuration to the scan tool by following the scan tool on-scr..