Ford Fusion: Automatic Transmission / Automatic Transmission External Controls - 6-Speed Automatic Transmission – 6F35

Transmission Fluid Warmer. Removal and Installation

Special Tool(s) / General Equipment Hose Clamp(s) Materials Name Specification Motorcraft® MERCON® LV Automatic Transmission FluidXT-10-QLVC WSS-M2C938-AMERCON® LV,   Removal Remove the battery tray...

External Controls - Component Location. Description and Operation

Component Location Item Part Number Description 1 7P1557P155 GSM (gearshift module) with rotary dial 2 13D73013D730 TCS (transmission control switch) 3 7E0967E096 TRCM (transmission range control module) 4 7E3957E395 Selector lever cable ..

Other information:

Ford Fusion 2013–2020 Service Manual: Overhead Console. Removal and Installation

Removal NOTE: Removal steps in this procedure may contain installation details. NOTE: Consoles look different depending on option level. Insert trim tool in location(s) shown. Rotate the tool 90 degrees to release the overhead console rear retainers. Working from the rear to the front along each side release the overhead conso..

Ford Fusion 2013–2020 Owners Manual: Following a Vehicle. Following a Vehicle to a Complete Stop

Following a Vehicle WARNING: When following a vehicle that is braking, your vehicle does not always decelerate quickly enough to avoid a crash without driver intervention. Apply the brakes when necessary. Failure to follow this instruction could result in personal injury or death. WARNING: The system only warns of vehicles detected by the radar sensor. In some cases there may be no warning..