Other information:
B0001:11, B0001:12, B0001:13 and B0001:1A
Refer to Wiring Diagrams Cell 46 for schematic and connector information.
Normal Operation and Fault Conditions
The RCM continuously monitors the driver airbag stage 1 circuits for the following faults:
Resistance out of range
Unexpected voltage
Short to ground
Faulted driver airbag
If a fault is detected, the RCM..
Removal
NOTE:
LH shown, RH similar.
NOTE:
Removal steps in this procedure may contain installation details.
Release the tabs and remove the door trim panel cover.
Remove the door trim panel retainer.
Torque:
44 lb.in (5 Nm)
Remove the front door window control switch.
Refer to: Front Door Window Control Swit..