Ford Fusion: Suspension / Suspension System - General Information

Suspension

..

Specifications

  General Specifications Item Specification Ball Joint Deflection Lower 0.0 mm (0.0 in) - 0...

Other information:

Ford Fusion 2013–2020 Service Manual: Pinpoint Test - DTC: A. Diagnosis and Testing

B0001:11, B0001:12, B0001:13 and B0001:1A Refer to Wiring Diagrams Cell 46 for schematic and connector information. Normal Operation and Fault Conditions The RCM continuously monitors the driver airbag stage 1 circuits for the following faults: Resistance out of range Unexpected voltage Short to ground Faulted driver airbag If a fault is detected, the RCM..

Ford Fusion 2013–2020 Service Manual: Cylinder Head Distortion. General Procedures

Special Tool(s) / General Equipment Feeler Gauge Check NOTE: Refer to the appropriate Section 303-01 for the specification. NOTE: Make sure all cylinder head surfaces are clear of any gasket material, silicone sealant, oil and coolant. The cylinder head surface must be clean and dry before running a flatness check. NOTE: Use a Straightedge that is calibrated by th..