Ford Fusion: Body and Paint / Rear View Mirrors

Rocker Panel Moulding. Removal and Installation

Removal NOTE: LH side shown, RH side similar. NOTE: Removal steps in this procedure may contain installation details. NOTICE: Before beginning any service procedure in this section, REFER to Safety Warnings in section 100-00 General Information...

Rear View Mirrors - Overview. Description and Operation

Overview Exterior, Power This vehicle is equipped with LH and RH power mirrors. The power mirror system allows the exterior mirror glass to be positioned electronically...

Other information:

Ford Fusion 2013–2020 Service Manual: Driver Front Seat Module (DSM). Removal and Installation

Removal NOTE: Removal steps in this procedure may contain installation details. All vehicles NOTE: This step is only necessary when installing a new component. NOTE: The PMI process must begin with the current DSM installed. If the current DSM does not respond to the diagnostic scan tool, the tool may prompt for As-Built Data as part of the repair...

Ford Fusion 2013–2020 Service Manual: Factory Mode Deactivation. General Procedures

Deactivation NOTE: During vehicle build, some modules, such as the IPC and BCM module are set in factory mode. Factory mode reduces the drain on the battery during longer periods where the vehicle is not used. While in the factory mode, various systems may be altered or disabled and the IPC displays FACTORY MODE CONTACT DEALER in the message center...