Ford Fusion: Instrumentation and Warning Systems / Parking Aid

Horn. Removal and Installation

Removal NOTE: The removal steps in this procedure may include installation details. Remove the bumper cover. Refer to: Front Bumper Cover (501-19 Bumpers, Removal and Installation)...

Specifications

  General Specifications - Rear Parking Aid Item Specification Test object position 1 (P1) and position 5 (P5), distance from rear bumper 30 cm (12 in) Test object position 2 (P2) and position 4 (P4), distance from rear bumper 91 cm (36 in) Test object position 3 (P3), distance from rear bumper 152 cm (60 in) ..

Other information:

Ford Fusion 2013–2020 Service Manual: Perimeter Anti-Theft Alarm - Overview. Description and Operation

Overview The perimeter alarm system deters unauthorized entry into the vehicle by sounding the horn and flashing all the turn signals and interior courtesy lamps. When an unauthorized entry occurs, the horn and lamps activate for 30 seconds. After 30 seconds, the horn stops sounding, but the lamps continue to flash for up to 5 minutes. The panic alarm operates similar to the perimeter alarm..

Ford Fusion 2013–2020 Service Manual: Cylinder Block Distortion. General Procedures

Special Tool(s) / General Equipment Feeler Gauge Check NOTE: Refer to the appropriate Section 303-01 for the specification. NOTE: Use a Straightedge that is calibrated by the manufacturer to be flat within 0.005 mm (0.0002 in) per running foot of length, such as Snap-On® GA438A or equivalent. For example, if the Straightedge is 61 cm (24 in) long, the machined edge m..