Other information:
Programming
NOTE:
This procedure works only if the spare key programming is enabled.
NOTE:
Two previously programmed keys are required to perform this
procedure. All the steps must be completed within 30 seconds.
NOTE:
Make sure all the doors are closed prior to beginning this
procedure and they remain closed until the procedure is complete...
System Operation
System Diagram
Item
Description
1
PCM
2
HS-CAN
3
Active Torque Coupling (ATC) solenoid (integral to the Rear Drive Unit (RDU)
4
BCM
5
IPC
6
RCM
7
ABS module
8
HS-CAN
9
HS-CAN
10
MS-CAN
11
AWD relay module
12
LH rear wheel speed sensor
13
RH..