Ford Fusion: Information and Entertainment System - General Information - Vehicles With: SYNC 3 / Speaker Audio Test. General Procedures

Bezel Diagnostics. General Procedures

Check NOTE: If there is a concern with one of the following components and Bezel Diagnostics cannot be accessed, obtain the module part number by referencing the label attached to the module...

SYNC Module [APIM] Programming. General Procedures

Activation   WARNING: Before beginning any service procedure in this section, refer to Health and Safety Precautions in section 100-00 General Information...

Other information:

Ford Fusion 2013–2020 Owners Manual: Using the Blind Spot Information System

Vehicles with Automatic Transmission The system turns on when all of the following occur: You start your vehicle. You shift into drive (D). The vehicle speed is greater than 6 mph (10 km/h). Note: The system does not operate in park (P) or reverse (R)...

Ford Fusion 2013–2020 Service Manual: Component Bleeding. General Procedures

Special Tool(s) / General Equipment Master Cylinder Bleeding Set Bleeding NOTICE: If the fluid is spilled on the paintwork, the affected area must be immediately washed down with cold water. Master Cylinder NOTE: When a new brake master cylinder has been installed, it should be primed to prevent air from entering the system...