Ford Fusion: Electrical / Information and Entertainment Systems

Direct Current/Direct Current (DC/DC) Converter Control Module. Removal and Installation

Removal   WARNING: Before beginning any service procedure in this section, refer to Safety Warnings in section 100-00 General Information...

Information and Entertainment System - General Information - Vehicles With: SYNC 3

..

Other information:

Ford Fusion 2013–2020 Service Manual: Cylinder Bore Taper. General Procedures

Check NOTE: Refer to the appropriate Section 303-01 for the specification. Measure the cylinder bore at the top, middle and bottom of piston ring travel in 2 directions as indicated. Verify the cylinder bore is within the wear limit. The difference indicates the cylinder bore taper. If the cylinder bore taper does not meet specification, bore the cylinder to the next oversize lim..

Ford Fusion 2013–2020 Service Manual: Parking Brake Actuator Motor. Removal and Installation

Removal NOTE: Removal steps in this procedure may contain installation details. With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation). Disconnect the electrical connector and detach the wiring retainer. NOTE: If there is evidence of brake f..