Overview
The cruise control system is controlled by the PCM.
The
cruise control mode is selected from the steering wheel mounted
switches (ON/OFF, SET+, SET- and CAN/RES), which are integrated into the
LH steering wheel switch...
Other information:
Overview
The shift by wire system uses a rotary dial mounted on top of the GSM to command an actuator called the TRCM to change gear lever positions via a shift cable connected to the manual control lever located on the transmission.
The shift by wire system consists of:
a GSM that uses a rotary dial to select the desired gear...
Special Tool(s) /
General Equipment
Hot Air Gun
8 mm Drill Bit
MIG/MAG Welding Equipment
Spot Weld Drill Bit
Materials
Name
Specification
Seam SealerTA-2-B, 3M™ 08308, LORD Fusor® 803DTM
-
Removal
WARNING:
Before beginning any service procedure in this
section, refer to Safety Warnings in section 100-00 General Information...