Ford Fusion: Wheels and Tires / Specifications

Ford Fusion 2013–2020 Service Manual / Chassis / Suspension / Wheels and Tires / Specifications

Material

Item	Specification	Fill Capacity
High Temperature Nickel Anti-Seize Lubricant / XL-2	-	-
Motorcraft® Wheel and Tire Cleaner - ZC-37-A	-	-

General Specifications

Item	Specification
Tire Inflation
Tires	See Safety Certification Label on driver door jamb
Wheel Weights
Wheel weight type	Use a wheel weight manufacturer's rim gauge to determine the correct wheel weight application

Torque Specifications

Item	Nm	lb-ft	lb-in
Valve stem-to-TPMS sensor screw	1.5	-	13
Wheel nutsa	-	-	-

aRefer to the procedure in this section.

Wheels and Tires

Safety Precautions - Overview. Description and Operation

Overview Before beginning any service procedure in this manual, refer to health and safety warnings in section 100-00 General Information. Failure to follow this instruction may result in serious personal injury...

Other information:

Ford Fusion 2013–2020 Service Manual: A-Pillar Trim Panel. Removal and Installation

Removal NOTE: RH side shown, LH side similar. Release the retainers and remove the instrument panel side trim panel. Position aside the front door weatherstrip. Release the lower retainers...

Ford Fusion 2013–2020 Service Manual: Rear Toe Adjustment. General Procedures

Special Tool(s) / General Equipment Wheel Alignment System Adjustment NOTICE: Do not use any tools or equipment to move the wheel and tire assembly or suspension components while checking for relative movement. Suspension damage may occur...

Cross Traffic Alert System Sensors

Ford Fusion. Cross Traffic Alert System Sensors

The sensors are behind the rear bumper on both sides of your vehicle.