Ford Fusion: Generator and Regulator / Specifications
Ford Fusion 2013–2020 Service Manual / Electrical / Battery and Charging System / Generator and Regulator / Specifications
General Specifications
| Item | Specification |
|---|---|
| 1.5L EcoBoost - 150A (base) | |
| Generator pulley ratio | 2.42:1 |
| Generator pulley replaceable | Yes |
| Generator pulley type | Overrunning Alternator Decoupler (OAD) |
| Rating | 90 amps at 750 rpm (min) to 155 amps at 2,400 rpm (max) |
| Voltage regulator type | Electronic internal with generator |
| 1.5L EcoBoost - 175A (optional) | |
| Generator pulley ratio | 2.42:1 |
| Generator pulley replaceable | Yes |
| Generator pulley type | OAD |
| Rating | 120 amps at 765 rpm (min) to 180 amps at 2,480 rpm (max) |
| Voltage regulator type | Electronic internal with generator |
| 2.0L EcoBoost - 150A (base) | |
| Generator pulley ratio | 2.76:1 |
| Generator pulley replaceable | Yes |
| Generator pulley type | OAD |
| Rating | 90 amps at 675 rpm (min) to 160 amps at 2,200 rpm (max) |
| Voltage regulator type | Electronic internal with generator |
| 2.0L EcoBoost - 175A (optional) | |
| Generator pulley ratio | 2.44:1 |
| Generator pulley replaceable | Yes |
| Generator pulley type | OAD |
| Rating | 120 amps at 765 rpm (min) to 180 amps at 2,480 rpm (max) |
| Voltage regulator type | Electronic internal with generator |
| 2.0L EcoBoost - 200A (optional) | |
| Generator pulley ratio | 2.44:1 |
| Generator pulley replaceable | Yes |
| Generator pulley type | OAD |
| Rating | 130 amps at 750 rpm (min) to 200 amps at 2,400 rpm (max) |
| Voltage regulator type | Electronic internal with generator |
| 2.7L EcoBoost - 200A | |
| Generator pulley ratio | 2.43:1 |
| Generator pulley replaceable | Yes |
| Generator pulley type | OAD |
| Rating | 130 amps at 750 rpm (min) to 200 amps at 2,400 rpm (max) |
| Voltage regulator type | Electronic internal with generator |
Generator - 1.5L EcoBoost (118kW/160PS) – I4. Removal and Installation
Removal
NOTE:
Early build vehicle shown with idler pulley attached to the
generator shown. Late build vehicles similar, without idler pulley
attached to the generator...
Other information:
Ford Fusion 2013–2020 Service Manual: Front Floor Panel Bracket and Support. Removal and Installation
Special Tool(s) / General Equipment 8 mm Drill Bit MIG/MAG Welding Equipment Spot Weld Drill Bit Locking Pliers Materials Name Specification Seam SealerTA-2-B, 3M™ 08308, LORD Fusor® 803DTM - Removal NOTICE: Battery electric vehicle (BEV), hybrid electric vehicle (HEV) and plug-in hybrid electric vehicle (PHEV) contain a high-voltage battery..
Ford Fusion 2013–2020 Service Manual: Evaporator Inlet and Outlet Manifold - 2.7L EcoBoost (238kW/324PS). Removal and Installation
Special Tool(s) / General Equipment Hose Clamp Remover/Installer Removal NOTICE: During the removal or installation of components, cap, tape or otherwise appropriately protect all openings and tubes/fittings to prevent the ingress of dirt or other contamination. Remove caps, tape and other protective materials prior to installation. NOTE: Removal steps in this procedure may..
Categories
- Manuals Home
- 2nd Generation Ford Fusion Owners Manual
- 2nd Generation Ford Fusion Service Manual
- Memory Function
- Steering Column Control Module (SCCM). Removal and Installation
- Starter Motor. Removal and Installation
- New on site
- Most important about car
Parallel Parking
The system detects available parallel parking spaces and steers your vehicle into the space. You control the accelerator, gearshift and brakes. The system visually and audibly guides you into a parallel parking space.
Press the button once to search
for a parking space.
Copyright © 2024 www.fofusion2.com