Ford Fusion Manuals

Ford Fusion: Steering Column / Steering Column - Overview. Description and Operation

Ford Fusion 2013–2020 Service Manual / Chassis / Steering System / Steering Column / Steering Column - Overview. Description and Operation

Steering Column Overview

The power adjustable steering column system consists of the following components:

  • Steering column
  • Upper and lower steering column shrouds
  • Telescopic and tilt motors
  • Steering column control switch
  • SCCM
  • DSM

The steering column is the mechanical linkage between the steering wheel and the steering gear. The steering wheel is mounted to a shaft which passes through the center of the steering column to the intermediate shaft, which connects to the steering gear. The intermediate shaft and steering column shaft both utilize non-servicable U-joint type couplings.

Vehicles with the manual tilt/telescopic steering column are controlled by a mechanical lever on the underside of the steering column to lock and unlock the steering column. When the lever is pulled down, the steering column can be adjusted up or down and in or out to the desired position. While holding the steering wheel in the desired position, pulling the lever up to its original position locks the steering column.

Vehicles with the power tilt/telescopic steering column are controlled by operating the steering column control switch, using the steering column tilt/telescopic motors to achieve the desired steering column position. The steering column can be adjusted up or down and in or out to the desired position. The power tilt/telescopic steering column is also part of the driver memory feature, positioning the seat, column and mirrors to programmed positions.

    Steering Column

    ..

    Steering Column - System Operation and Component Description. Description and Operation

    System Operation System Diagram Item Description 1 Hall Effect Sensor 2 Steering Column Tilt Motor 3 DDM 4 SCCM 5 Memory Set Switch 6 DSM 7 BCM 8 MS-CAN 9 HS2-CAN 10 Steering Column Control Switch 11 Steering Column Telescope Motor 12 Hall Effect Sensor 13 GWM 14 HS1-CAN Network Messag..

    Other information:

    Ford Fusion 2013–2020 Service Manual: Bezel Diagnostics. General Procedures


    Check NOTE: If there is a concern with one of the following components and Bezel Diagnostics cannot be accessed, obtain the module part number by referencing the label attached to the module. Inoperative ACM Inoperative (blank or does not power on) display unit (non-touchscreen display or touchscreen display) Inoperative FCIM or radio control panel Inoperative steering w..

    Ford Fusion 2013–2020 Service Manual: Parking, Rear and License Plate Lamps. Diagnosis and Testing


    DTC Chart: BCM Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).   BCM DTC Chart DTC Description Action B1445:11 Rear Park Lamps Output: Circuit Short to Ground   GO to P..

    Categories

    Manual Climate Control

    Ford Fusion. Manual Climate Control

    Note: Depending on your vehicle option package, the controls may look different from what you see here.

    read more

    Copyright © 2023 www.fofusion2.com