Ford Fusion: Driveline / Rear Drive Axle/Differential

Rear Driveshaft. Removal and Installation

Special Tool(s) / General Equipment Flat-Bladed Screwdriver Punch Copper Hammer Removal NOTE: The max articulation of any CV is 10 degrees...

Specifications

  Lubricants, Fluids, Sealers and Adhesives Name Specifications Motorcraft® SAE 80W-90 Premium Rear Axle Lubricant XY-80W90-QL (US); CXY-80W90-1L (Canada) WSP-M2C197-A Motorcraft® Silicone Gasket and Sealant TA-30 WSE-M4G323-A4   Capacities Item Fill Capacity Level ..

Other information:

Ford Fusion 2013–2020 Service Manual: Air Conditioning (A/C) Clutch and Air Conditioning (A/C) Clutch Field Coil. General Procedures

Special Tool(s) / General Equipment 412-001 (T71P-19703-B) Remover, Compressor Pulley Activation Remove the A/C compressor. Refer to Air Conditioning A/C Compressor procedure in Group 412. NOTE: If equipped with spring rubber clutch. Using the universal clutch holding tool, hold the clutch and remove the A/C clutch disc and hub bolt. For fixed c..

Ford Fusion 2013–2020 Service Manual: Engine. Diagnosis and Testing

Inspection and Verification - Engine Performance NOTE: There are 2 diagnostic paths that can be followed depending on the type of engine concern. Carry out Inspection and Verification - Engine Performance or Inspection and Verification - NVH. Verify the customer concern. Visually inspect for obvious signs of mechanical or electrical damage. If an obvious cause for an ob..