Ford Fusion: Electronic Feature Group / Collision Warning and Collision Avoidance System

Cruise Control Module (CCM). Removal and Installation

Removal NOTE: Removal steps in this procedure may contain installation details. Remove the front bumper cover. Refer to: Front Bumper Cover (501-19 Bumpers, Removal and Installation)...

Collision Warning and Collision Avoidance System - Component Location. Description and Operation

Item Description 1 IPMA 2 HUD module 3 CCM ..

Other information:

Ford Fusion 2013–2020 Service Manual: Intermediate Shaft Seal. Removal and Installation

Special Tool(s) / General Equipment 205-907Handle, 32 DriverTKIT-2008DH-FLM 307-256 (T92P-77000-FH) Installer, Differential Fluid SealTKIT-1992-FLMH/LMH Puller Removal Remove the RH halfshaft. Refer to: Front Halfshaft RH (205-04 Front Drive Halfshafts, Removal and Installation). Using the puller, remove and discard the intermediate shaft seal..

Ford Fusion 2013–2020 Service Manual: Front Drive Halfshafts. Diagnosis and Testing

Preliminary Inspection Visually inspect the CV joints, housing, boots, and clamps for obvious signs of mechanical damage. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step If the cause is not visually evident, verify the symptom and REFER to Symptom Chart: NVH. Symptom Chart(s) Diagn..