Ford Fusion: Brake System / Brake System - General Information

Brake System

..

Specifications

  Lubricants, Fluids, Sealers and Adhesives   Specifications Motorcraft® DOT 4 LV High Performance Motor Vehicle Brake Fluid / PM-20 WSS-M6C65-A2   Torque Specifications Item Nm lb-ft lb-in Front caliper bleeder screw 9 - 80 Rear caliper b..

Other information:

Ford Fusion 2013–2020 Service Manual: Cylinder Block Distortion. General Procedures

Special Tool(s) / General Equipment Feeler Gauge Check NOTE: Refer to the appropriate Section 303-01 for the specification. NOTE: Use a Straightedge that is calibrated by the manufacturer to be flat within 0.005 mm (0.0002 in) per running foot of length, such as Snap-On® GA438A or equivalent. For example, if the Straightedge is 61 cm (24 in) long, the machined edge m..

Ford Fusion 2013–2020 Service Manual: Engine Cooling. Diagnosis and Testing

Special Tool(s) 3-Way HD Antifreeze Coolant Test Kit328-2050-62291 or equivalent Coolant/Battery RefractometerROB75240 or equivalent Pressure TesterSTN12270 or equivalent UView Combustion Leak TesterUVU560000-R NOTICE: Use the correct coolant. Do not mix coolant types. Mixing coolant types may degrade the coolant corrosion prot..