Ford Fusion: Body and Paint / Body Repairs - Vehicle Specific Information and Tolerance Checks

Welding Precautions. General Procedures

Check   WARNING: Invisible ultraviolet and infrared rays emitted in welding can injure unprotected eyes and skin. Always use protection such as a welder's helmet with dark-colored filter lenses of the correct density...

Body and Frame. Description and Operation

Body   WARNING: Electric vehicles damaged by a crash may have compromised high voltage safety systems and present a potential high voltage electrical shock hazard...

Other information:

Ford Fusion 2013–2020 Service Manual: Airbag and Seatbelt Pretensioner Supplemental Restraint System (SRS) - Overview. Description and Operation

Overview The RCM continually receives and monitors inputs from the OCSM, BECMB and various other hard-wired switches and sensors. If the RCM detects a sudden vehicle deceleration and/or lateral deceleration based on the information received from the various sensors, and determines that deployment is necessary, the RCM applies voltage and current to deploy the appropriate SRS components...

Ford Fusion 2013–2020 Service Manual: Pinpoint Test - DTC: H. Diagnosis and Testing

B0050:11, B0050:12, B0050:13 and B0050:1D Refer to Wiring Diagrams Cell 46 for schematic and connector information. Normal Operation and Fault Conditions The RCM monitors the driver seatbelt buckle switch circuits for the following faults: Open circuit Short to voltage Short to ground Current out of range Faulted driver seatbelt buckle switch If ..