Ford Fusion: Wipers and Washers / Wipers and Washers - Overview. Description and Operation
Overview
The
windshield wiper/washer system is activated by the wiper/washer switch.
The windshield wiper/washer system has the following functions and
features:
-
Mist wipe
-
Windshield wash
-
Courtesy wipe
-
Windshield wipers (low/high speed)
-
Intermittent wipers
-
Speed dependent wipers
-
Wiper activated exterior lamps
-
Rain sensitive wipers (if equipped)
There are 6 intermittent/sensitivity settings to choose from for the intermittent/rain sensitive wipers.
System Operation
System Diagram
Item
Description
1
HS3-CAN
2
LIN
3
Rain Sensor
4
HS1-CAN
5
LIN
6
HS2-CAN
7
HS1-CAN
8
Washer Motor
9
Right Windshield Wiper Motor
10
Left Windshield Wiper Motor
11
SCCM
12
BCM
13
Wiper Relay
14
BJB
15
GWM
16
IPC
17
Wiper/Washer Switch
18
PC..
Other information:
On both sides, remove the A-pillar trim panel.
Refer to: A-Pillar Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).
On both sides, remove the B-pillar trim panel.
Refer to: B-Pillar Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).
On both sides, remove the C-pillar upper trim panels.
Refer to: C-Pillar Uppe..
B0002:11, B0002:12, B0002:13 and B0002:1A
Refer to Wiring Diagrams Cell 46 for schematic and connector information.
Normal Operation and Fault Conditions
The RCM continuously monitors the driver airbag stage 2 circuits for the following faults:
Resistance out of range
Unexpected voltage
Short to ground
Faulted driver airbag
If a fault is detected, the RCM..