Other information:
Check
NOTE:
This procedure does not apply to CV joints, flex couplers or
double cardan joints that are used in some driveshafts. This check is
for single-cross and roller-style joints found in the driveshafts.
NOTE:
Prior to checking driveline angularity, inspect the U-joints for correct operation...
General Specifications - Rear Parking Aid
Item
Specification
Test object position 1 (P1) and position 5 (P5), distance from rear bumper
30 cm (12 in)
Test object position 2 (P2) and position 4 (P4), distance from rear bumper
91 cm (36 in)
Test object position 3 (P3), distance from rear bumper
152 cm (60 in)
..