Ford Fusion: Fuel Charging and Controls - Turbocharger - 1.5L EcoBoost (118kW/160PS) – I4 / Turbocharger - System Operation and Component Description. Description and Operation

Turbocharger - Overview. Description and Operation

Overview NOTICE: Whenever turbocharger air intake system components are removed, always cover open ports to protect from debris. It is important that no foreign material enter the system...

Turbocharger. Removal and Installation

Special Tool(s) / General Equipment Hose Clamp Remover/Installer Materials Name Specification Motorcraft® Metal Brake Parts CleanerPM-4-A, PM-4-B -  Removal NOTICE: The turbocharger compressor vanes can be damaged by even the smallest particles...

Other information:

Ford Fusion 2013–2020 Service Manual: Bezel Diagnostics. General Procedures

Check NOTE: If there is a concern with one of the following components and Bezel Diagnostics cannot be accessed, obtain the module part number by referencing the label attached to the module. Inoperative ACM Inoperative (blank or does not power on) display unit (non-touchscreen display or touchscreen display) Inoperative FCIM or radio control panel Inoperative steering w..

Ford Fusion 2013–2020 Service Manual: Coolant Pump. Removal and Installation

Special Tool(s) / General Equipment 303-1556Locking Tool, Timing BeltTKIT-2010B-FLMTKIT-2010B-ROW 303-748Locking Tool, CrankshaftTKIT-2010B-FLMTKIT-2010B-ROW Hose Clamp Remover/Installer 4 mm Drill Bit Removal NOTE: The original coolant pump may not be equipped with a clutch and wiring harness connector. Refer to: Engine Cooling System Health and Safet..