Ford Fusion Manuals

Ford Fusion: Tire Pressure Monitoring System (TPMS) / Tire Pressure Monitoring System (TPMS) Sensor. Removal and Installation

Ford Fusion 2013–2020 Service Manual / Chassis / Suspension / Tire Pressure Monitoring System (TPMS) / Tire Pressure Monitoring System (TPMS) Sensor. Removal and Installation

Removal

  1. Ford Fusion. Tire Pressure Monitoring System (TPMS) Sensor. Removal and Installation  WARNING: The Tire Pressure Monitoring System (TPMS) sensor battery may release hazardous chemicals if exposed to extreme mechanical damage. If these chemicals contact the skin or eyes, flush immediately with water for a minimum of 15 minutes and get prompt medical attention. If any part of the battery is swallowed, contact a physician immediately. When disposing of Tire Pressure Monitoring System (TPMS) sensors, follow the correct procedures for hazardous material disposal. Failure to follow these instructions may result in serious personal injury.

    NOTE: The Tire Pressure Monitoring System (TPMS) sensor cannot be removed without disassembly of the wheel and tire.

    Disassemble the wheel and tire.
    Refer to: Wheel and Tire (204-04A Wheels and Tires, Disassembly and Assembly).

Installation

  1. NOTE: The Tire Pressure Monitoring System (TPMS) sensor cannot be installed without disassembly of the wheel and tire.

    Assemble the wheel and tire.
    Refer to: Wheel and Tire (204-04A Wheels and Tires, Disassembly and Assembly).

    Tire Pressure Monitoring System (TPMS) Sensor Location Calibration. General Procedures

    Special Tool(s) / General Equipment 204-D081A (204-D081) Tire Pressure Monitor (TPMS) Ford Diagnostic Equipment Programming NOTE: The TPMS can be placed into learn mode using a diagnostic scan tool or manually where a diagnostic scan tool is not available...

    Vehicle Dynamic Suspension

    ..

    Other information:

    Ford Fusion 2013–2020 Service Manual: Instrument Panel and Interior Switches Illumination - Overview. Description and Operation


    Overview Dimmable illumination provides backlighting to switches and control components when the parking lamps are on or a set level of intensity when the ignition is on for non-dimmable components. The level of intensity for the dimmable backlit components is adjusted by pressing the instrument panel dimmer switch up to increase intensity or down to decrease intensity. The illumination so..

    Ford Fusion 2013–2020 Service Manual: Brake Master Cylinder. Removal and Installation


    Removal NOTE: Removal steps in this procedure may contain installation details. All vehicles NOTICE: Before removing the master cylinder, relieve the vacuum in the brake booster or the master cylinder O-ring seal may be drawn into the brake booster, causing brake booster failure and increased brake pedal effort. Fully apply and release the brake pedal 5 times. ..

    Categories

    Parallel Parking

    The system detects available parallel parking spaces and steers your vehicle into the space. You control the accelerator, gearshift and brakes. The system visually and audibly guides you into a parallel parking space.

    Ford Fusion. Parallel Parking Press the button once to search for a parking space.

    read more

    Copyright © 2025 www.fofusion2.com