Ford Fusion Manuals

Ford Fusion: Information and Entertainment System - General Information - Vehicles With: SYNC 3 / Specifications


  Torque Specifications


Item Nm lb-ft lb-in
ACM bolts 2.5 - 22
Antenna bolt 7 - 62
APIM screws 1 - 9
DACMC bolts 6 - 53
DSP bolts 6 - 53
FCIM bolts 2.5 - 22
FDIM bolts 2.5 - 22
Front door speaker bolts 2.5 - 22
Rear door speaker bolts 2.5 - 22
TCU bolts 5 - 44

    Information and Entertainment System - General Information - Vehicles With: SYNC 3

    ..

    Information and Entertainment System - Component Location. Description and Operation

    NOTE: The available speaker configurations are shown first. The remaining hidden audio/SYNC system components and various cable routings follow the speaker configurations...

    Other information:

    Ford Fusion 2013–2020 Service Manual: Pinpoint Test - DTC: H. Diagnosis and Testing


    B0050:11, B0050:12, B0050:13 and B0050:1D Refer to Wiring Diagrams Cell 46 for schematic and connector information. Normal Operation and Fault Conditions The RCM monitors the driver seatbelt buckle switch circuits for the following faults: Open circuit Short to voltage Short to ground Current out of range Faulted driver seatbelt buckle switch If ..

    Ford Fusion 2013–2020 Service Manual: Spring. Removal and Installation


    Removal NOTICE: Suspension fasteners are critical parts that affect the performance of vital components and systems. Failure of these fasteners may result in major service expense. Use the same or equivalent parts if replacement is necessary. Do not use a replacement part of lesser quality or substitute design. Tighten fasteners as specified. Remove the lower arm. Refer to: Low..

    Categories

    Adjusting the Steering Wheel

    WARNING: Do not adjust the steering wheel when your vehicle is moving.

    Note: Make sure that you are sitting in the correct position.

    Ford Fusion. Adjusting the Steering Wheel

    Unlock the steering column. Adjust the steering wheel to the desired position.

    read more

    Copyright © 2026 www.fofusion2.com