Other information:
B0052:11, B0052:12, B0052:13 and B0052:1D
Refer to Wiring Diagrams Cell 46 for schematic and connector information.
Normal Operation and Fault Conditions
The RCM monitors the passenger seatbelt buckle switch circuits for the following faults:
Open circuit
Short to voltage
Short to ground
Current out of range
Faulted passenger seatbelt buckle switch
..
Activation
Phase 1 - Leak Verification
Run the EVAP Test with the scan tool.
NOTE:
Some small leaks may not be detected using the EVAP Test. If the system has passed the test but a leak is still suspected, then proceed to Phase 2.
If the EVAP system failed the EVAP Test, then proceed to Phase 2.
Phase 2 - System Leak Check
Disconnect the fuel vapor tube-t..