Ford Fusion: Glass, Frames and Mechanisms / Glass, Frames and Mechanisms - Overview. Description and Operation
Overview
Power Windows
Standard power window features include one-touch up and one-touch down operation.
The window control switch:
-
can be used to manually or automatically raise/lower all
windows from the driver door window control switch or the individual
passenger window from the corresponding door switch.
-
has a rear passenger window lock-out feature (located on the driver door window control switch).
Rear Window Defrost
When the rear window defrost button (integral to the FCIM) is pressed, the BCM activates the rear window defrost relay (integral to the BJB). When the rear window defrost relay is active, the rear window defrost grid is energized.
System Operation
System Diagram - Power Windows
Driver Side Windows
Passenger Side Windows
Network Message Chart - Power Windows
Passenger Door Module (PDM) Network Input Messages
Broadcast Message
Originating Module
Message Purpose
Passenger window command
DDM
When activating the front ..
Other information:
Remove the screws, grommets and the engine front undershield.
Remove the screws and the engine undershield.
..
Removal
NOTICE:
Do not remove or install the M8 nut (20 Nm) on the cable
eyelet bolt while the battery monitoring sensor is attached to the
battery post as this causes damage to the sensor, connector, and
possibly the battery post and case.
Disconnect the battery.
Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures).
..