Other information:
B0013:11, B0013:12, B0013:13 and B0013:1A
Refer to Wiring Diagrams Cell 46 for schematic and connector information.
Normal Operation and Fault Conditions
The RCM continuously monitors the passenger knee airbag circuits for the following faults:
Resistance out of range
Unexpected voltage
Short to ground
Faulted passenger knee airbag
If a fault is detected,..
Check
NOTE:
Refer to the appropriate Section 303-01 for the specification.
NOTE:
Valve guides tend to wear in an hourglass pattern.
The ball gauge can be inserted into the combustion chamber side of the
valve guide, if necessary.
Use a ball gauge to determine the inside diameter of
the valve guides in 2 directions at the top, middle and bottom of the
valve guide.
..