Ford Fusion: Capacities and Specifications

Technical Specifications - 2.7L EcoBoost™

Wheel Lug Nut Torque Specifications WARNING: When a wheel is installed, always remove any corrosion, dirt or foreign materials present on the mounting surfaces of the wheel or the surface of the wheel hub, brake drum or brake disc that contacts the wheel...

Engine Specifications - 1.5L EcoBoost™, 2.0L EcoBoost™, 2.5L, 2.7L EcoBoost™

Engine Specifications - 1.5L EcoBoost™ Drivebelt Routing Engine Specifications - 2.0L EcoBoost™ Drivebelt Routing Long drivebelt is on first pulley groove closest to engine Short drivebelt is on second pulley groove farthest from engine Engine Specifications - 2...

Other information:

Ford Fusion 2013–2020 Service Manual: Valve Guide Inner Diameter. General Procedures

Check NOTE: Refer to the appropriate Section 303-01 for the specification. NOTE: Valve guides tend to wear in an hourglass pattern. The ball gauge can be inserted into the combustion chamber side of the valve guide, if necessary. Use a ball gauge to determine the inside diameter of the valve guides in 2 directions at the top, middle and bottom of the valve guide...

Ford Fusion 2013–2020 Service Manual: Interior Rear Door Handle. Removal and Installation

Removal NOTE: LH side shown, RH side similar. Remove the rear door trim panel. Refer to: Rear Door Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation). Remove the retainers and remove the interior front door handle...