Ford Fusion: Capacities and Specifications / Capacities and Specifications - 2.0L EcoBoost™
Use oil and fluid that meets the defined specification and viscosity grade.
If you do not use oil and fluid that meets the defined specification and viscosity grade, it could result in:
- Component damage that your vehicle warranty does not cover.
- Longer engine cranking periods.
- Increased emission levels.
- Reduced engine performance.
- Reduced fuel economy.
- Reduced brake performance.
Air Conditioning System
WARNING: The air conditioning refrigerant system contains refrigerant under high pressure. Only qualified personnel should service the air conditioning refrigerant system. Opening the air conditioning refrigerant system can cause personal injury.
Capacities
Capacities and Specifications - 1.5L EcoBoost™
Use oil and fluid that meets the defined
specification and viscosity grade.
If you do not use oil and fluid that meets
the defined specification and viscosity
grade, it could result in:
Component damage that your vehicle
warranty does not cover...
Other information:
Ford Fusion 2013–2020 Service Manual: Turbocharger Bypass Valve. Removal and Installation
Removal NOTE: When removing any turbocharger air intake system components, make sure to cover any open ports to prevent debris from entering the system. The turbocharger compressor vanes can be damaged by even the smallest particles. All components need to be inspected and cleaned prior to installation or reassembly...
Ford Fusion 2013–2020 Service Manual: Front Subframe - 1.5L EcoBoost (118kW/160PS) – I4/2.0L EcoBoost (184kW/250PS) – MI4/2.5L Duratec (125kW/170PS). Removal and Installation
Special Tool(s) / General Equipment 300-OTC1585AEPowertrain Lift Tie Rod End Remover Wooden Block Materials Name Specification Motorcraft® Threadlock 262TA-26 WSK-M2G351-A6 Removal NOTICE: Suspension fasteners are critical parts that affect the performance of vital components and systems...
Categories
- Manuals Home
- 2nd Generation Ford Fusion Owners Manual
- 2nd Generation Ford Fusion Service Manual
- Pre-Collision Assist (IF EQUIPPED)
- Starter Motor. Removal and Installation
- Electronic Parking Brake (EPB) Service Mode Activation and Deactivation. General Procedures
- New on site
- Most important about car
Understanding Your Tire Pressure Monitoring System
The tire pressure monitoring system measures pressure in your road tires and sends the tire pressure readings to your vehicle. You can view the tire pressure readings through the information display. The low tire pressure warning light will turn on if the tire pressure is significantly low. Once the light is illuminated, your tires are under-inflated and need to be inflated to the manufacturer’s recommended tire pressure. Even if the light turns on and a short time later turns off, your tire pressure still needs to be checked.
