Ford Fusion: Fuel Charging and Controls - Turbocharger - 1.5L EcoBoost (118kW/160PS) – I4 / Turbocharger - Component Location. Description and Operation
1.5L EcoBoost Turbocharger Components
Item |
Description |
1 |
Turbocharger bypass valve |
2 |
Wastegate control valve solenoid |
3 |
Turbocharger coolant tubes |
4 |
Turbocharger oil return tube |
5 |
Turbocharger |
6 |
Turbocharger oil supply tube |
1.5L EcoBoost Turbocharger Control
Item |
Description |
1 |
Wastegate actuator |
2 |
Turbocharger |
3 |
Vacuum pump |
4 |
Wastegate control valve solenoid |
5 |
Turbocharger bypass valve |
Torque Specifications
Turbocharger bypass valve bolts :
53 lb.in (6 Nm)
Turbocharger wastegate regulating valve solenoid nuts :
62 lb...
Overview
NOTICE:
Whenever turbocharger air intake system components are
removed, always cover open ports to protect from debris. It is important
that no foreign material enter the system...
Other information:
B0002:11, B0002:12, B0002:13 and B0002:1A
Refer to Wiring Diagrams Cell 46 for schematic and connector information.
Normal Operation and Fault Conditions
The RCM continuously monitors the driver airbag stage 2 circuits for the following faults:
Resistance out of range
Unexpected voltage
Short to ground
Faulted driver airbag
If a fault is detected, the RCM..
Removal
NOTE:
Removal steps in this procedure may contain installation details.
WARNING:
Before beginning any service procedure in this
section, refer to Safety Warnings in section 100-00 General Information.
Failure to follow this instruction may result in serious personal
injury.
Refer to: Health and Safety Precautions (100-00 General Information, Description and Op..