Ford Fusion Manuals

Ford Fusion: Seatbelt Systems / Seatbelt Maintenance. General Procedures

Inspection

Ford Fusion. Seatbelt Maintenance. General Procedures  WARNING: All seatbelt components must be inspected and corrected as part of any collision repair. Inspect all seatbelt components as prescribed by Seatbelt Procedure After a Collision found in Section 501-20A General Procedures of this manual. Failure to follow this instruction may result in incorrect operation of the seatbelt system and increase the risk of serious personal injury or death in a crash.

  1. Periodically inspect the seatbelt assemblies for damage and that they remain in correct operating condition, particularly if they have been subjected to severe stress.
  1. Before installing the new seatbelt assembly, inspect the seatbelt retaining areas for damage and distortion. If the retaining points are damaged and distorted, work the sheet metal back to its original shape and structural integrity.
  1. Install the new seatbelt(s) using the appropriate instructions. Carry out the appropriate Functional Test procedure for all seating positions.
    Refer to: Seatbelt Systems (501-20A Seatbelt Systems, Diagnosis and Testing).

    Seatbelt Cleaning. General Procedures

    Cleaning   WARNING: Do not bleach or re-dye the seatbelt webbing, as the webbing may weaken. Failure to follow this instruction may increase the risk of serious personal injury or death in a crash...

    Seatbelt Procedure After a Collision. General Procedures

    Inspection   WARNING: All seatbelt components must be inspected and corrected as part of any collision repair. Inspect all seatbelt components as prescribed by Seatbelt Procedure After a Collision found in Section 501-20A General Procedures of this manual...

    Other information:

    Ford Fusion 2013–2020 Service Manual: Engine Undershield. Removal and Installation


    Remove the screws, grommets and the engine front undershield. Remove the screws and the engine undershield. ..

    Ford Fusion 2013–2020 Service Manual: Passive Anti-Theft System (PATS). Diagnosis and Testing


    DTC Charts Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).   BCM DTC Chart   DTC Description Action B10C7:01 Interior Trunk Antenna: General Electrical Failure   ..

    Categories

    Power Door Locks

    The power door lock control is on the driver and front passenger door panels.

    Ford Fusion. Power Door Locks

    Unlock. Lock.

    read more

    Copyright © 2024 www.fofusion2.com