Ford Fusion: Brake System / Power Brake Actuation

Brake Pedal and Bracket. Removal and Installation

Removal NOTE: Removal steps in this procedure may contain installation details. NOTICE: Do not service the brake pedal or brake booster without first removing the stoplamp switch...

Brake Booster. Removal and Installation

Materials Name Specification Motorcraft® MERCON® LV Automatic Transmission FluidXT-10-QLVC WSS-M2C938-AMERCON® LV,   Removal NOTE: Removal steps in this procedure may contain installation details...

Other information:

Ford Fusion 2013–2020 Service Manual: Specifications

  Lubricants, Fluids, Sealers and Adhesives   Specifications Motorcraft® DOT 4 LV High Performance Motor Vehicle Brake Fluid / PM-20 WSS-M6C65-A2   Torque Specifications Item Nm lb-ft lb-in Front caliper bleeder screw 9 - 80 Rear caliper b..

Ford Fusion 2013–2020 Service Manual: Transmission Line Pressure Test. Diagnosis and Testing

Line Pressure Test NOTE: Perform the line pressure test prior to performing the stall speed test. If the line pressure is low at stall, do not perform the stall speed test or transmission damage will occur. Do not maintain WOT in any transmission range for more than 5 seconds. This test verifies the line pressure is within specification. Remove the 2 bolts and position aside the air..