Ford Fusion: Seats / Manual Seats (If Equipped)
WARNING: Do not adjust the driver
seat or seatback when your vehicle is
moving.
WARNING: Rock the seat
backward and forward after releasing
the lever to make sure that it is fully
engaged.
WARNING: Reclining the seatback
can cause an occupant to slide under the
seat's safety belt, resulting in severe
personal injuries in the event of a crash.
The driver and passenger manual seats
may consist of:

- A bar to move the seat backward
and forward.
- A control to adjust the lumbar of
the seatback (driver seat only).
- A lever to adjust the height of the
seat (driver seat only).
- A lever to adjust the angle of the
seatback.
WARNING: Fully adjust the head
restraint before you sit in or operate your
vehicle. This will help minimize the risk
of neck injury in the event of a crash...
WARNING: Do not adjust the driver
seat or seatback when your vehicle is
moving.
WARNING: Do not place cargo or
any objects behind the seatback before
returning it to the original position...
Other information:
Removal
Remove the side shield screws.
Remove the side shield.
Lift up on the rear of the side shield and pull outward.
Push the side shield forward.
Disconnect the electrical connector...
Deactivation
NOTE:
After vehicle build, some vehicle modules are set in Transport mode including the IPC and the BCM. Transport mode reduces battery drain during longer periods where the vehicle is not used. While in transport mode, the IPC displays TRANSPORT MODE CONTACT DEALER
in the message center...