Ford Fusion: Intake Air Distribution and Filtering - 1.5L EcoBoost (118kW/160PS) – I4 / Intake Air Distribution and Filtering - Component Location. Description and Operation

Intake Air Distribution and Filtering - Overview. Description and Operation

Overview The air intake system cleans intake air with a replaceable, dry-type engine Air Cleaner (ACL) element made of treated, pleated paper. A new Air Cleaner (ACL) element must be installed periodically as scheduled...

Intake Air Distribution and Filtering. Diagnosis and Testing

Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. For information about these, refer to Section 100-00 for Diagnostic Methods...

Other information:

Ford Fusion 2013–2020 Service Manual: Active Torque Coupling Configuration. General Procedures

Configuration NOTICE: If the ATC (Active Torque Coupling) solenoid bar code information is not correct, Rear Drive Unit (RDU) damage or driveability concerns can occur. Using a diagnostic scan tool, under the toolbox icon select Powertrain then select Automatic Traction Control Barcode Entry...

Ford Fusion 2013–2020 Service Manual: Diagnostic Strategy. Diagnosis and Testing

Overview The diagnostic process for each transmission concern will vary depending on the symptoms and condition of the vehicle. The diagnostic process below is an efficient method to collect as much data as possible about the concern before performing a repair or removing the transmission from the vehicle for teardown and further inspection...