Ford Fusion: Using Adaptive Cruise Control (IF EQUIPPED) / Canceling the Set Speed. Resuming the Set Speed. Automatic Cancellation.
Park Brake Application
Canceling the Set Speed
Press and release the button or
tap the brake pedal.
Note: The system remembers the set
speed.
Resuming the Set Speed
Press and release the button.
Your vehicle speed returns to the
previously set speed and gap setting. The
set speed displays continuously in the
information display when the system is
active.
Note: Only use resume if you are aware of
the set speed and intend to return to it.
Automatic Cancellation
Automatic cancellation can also occur
when:
- The tires lose traction.
- You apply the parking brake.
Park Brake Application
Automatic parking brake application and
cancellation occurs if:
- You unbuckle the seatbelt and open
the door after you stop the vehicle.
- You hold the vehicle at a stop
continuously for more than three
minutes.
Overriding the Set Speed
WARNING: If you override the
system by pressing the accelerator
pedal, it does not automatically apply
the brakes to maintain a gap from any
vehicle ahead...
Hilly Condition Usage
Select a lower gear when the system is
active in situations such as prolonged
downhill driving on steep grades, for
example in mountainous areas...
Other information:
Special Tool(s) /
General Equipment
205-126
(T78P-4851-A)
Holding Fixture, Drive Pinion Flange
Tire Lever
Materials
Name
Specification
Motorcraft® Silicone Gasket and SealantTA-30
WSE-M4G323-A4
Removal
NOTICE:
When replacing the RDU clutch, the ACT coil and yoke are a matched set and must be replaced also...
Check
WARNING:
Invisible ultraviolet and infrared rays emitted in welding
can injure unprotected eyes and skin. Always use protection such as a
welder's helmet with dark-colored filter lenses of the correct density.
Electric welding will produce intense radiation, therefore, filter plate
lenses of the deepest shade providing adequate visibility are
recommended...