Ford Fusion Manuals

Ford Fusion: Using Adaptive Cruise Control (IF EQUIPPED) / Hilly Condition Usage. Switching Adaptive Cruise Control Off. Detection Issues

Ford Fusion 2013–2020 Owners Manual / Cruise Control / Using Adaptive Cruise Control (IF EQUIPPED) / Hilly Condition Usage. Switching Adaptive Cruise Control Off. Detection Issues

Hilly Condition Usage

Select a lower gear when the system is active in situations such as prolonged downhill driving on steep grades, for example in mountainous areas. The system needs additional engine braking in these situations to reduce the load on the vehicle’s regular brake system to prevent it from overheating.

Note: An audible alarm sounds and the system shuts down if it applies brakes for an extended period of time. This allows the brakes to cool. The system functions normally again after the brakes cool.

Switching Adaptive Cruise Control Off

Ford Fusion. Off. Detection Issues For vehicles without Speed Limiter, press and release the button when the system is in standby mode or switch the ignition off.

Ford Fusion. Off. Detection Issues For vehicles with Speed Limiter, press and release the button when the system is in standby mode or switch the ignition off.

Note: You erase the set speed when you switch the system off.

Detection Issues

WARNING: On rare occasions, detection issues can occur due to the road infrastructures, for example bridges, tunnels and safety barriers. In these cases, the system may brake late or unexpectedly. At all times, you are responsible for controlling your vehicle, supervising the system and intervening, if required.

WARNING: If the system malfunctions, have your vehicle checked as soon as possible.

The radar sensor has a limited field of view. It may not detect vehicles at all or detect a vehicle later than expected in some situations. The lead vehicle graphic does not illuminate if the system does not detect a vehicle in front of you.

    Canceling the Set Speed. Resuming the Set Speed. Automatic Cancellation. Park Brake Application

    Canceling the Set Speed Press and release the button or tap the brake pedal. Note: The system remembers the set speed. Resuming the Set Speed Press and release the button...

    Driving Aids

    ..

    Other information:

    Ford Fusion 2013–2020 Service Manual: Rear Door Latch. Removal and Installation


    Removal NOTE: LHside shown, RH side similar. NOTE: Removal steps in this procedure may contain installation details. Remove the exterior rear door handle. Refer to: Exterior Rear Door Handle (501-14 Handles, Locks, Latches and Entry Systems, Removal and Installation). Remove the exterior rear door handle reinforcement screw. Torque: 62 lb.in (7 Nm) ..

    Ford Fusion 2013–2020 Service Manual: A-Pillar Outer Panel Section and Reinforcement. Removal and Installation


    Special Tool(s) / General Equipment Resistance Spotwelding Equipment Hot Air Gun 8 mm Drill Bit MIG/MAG Welding Equipment Spot Weld Drill Bit Locking Pliers Materials Name Specification Seam SealerTA-2-B, 3M™ 08308, LORD Fusor® 803DTM -  Flexible Foam Repair3M™ 08463, LORD Fusor® 121 -  Removal   WARNING: Be..

    Categories

    Manual Climate Control

    Ford Fusion. Manual Climate Control

    Note: Depending on your vehicle option package, the controls may look different from what you see here.

    read more

    Copyright © 2022 www.fofusion2.com