Ford Fusion Manuals

Ford Fusion: Using Adaptive Cruise Control (IF EQUIPPED) / Overriding the Set Speed. Changing the Set Speed

Overriding the Set Speed

WARNING: If you override the system by pressing the accelerator pedal, it does not automatically apply the brakes to maintain a gap from any vehicle ahead.

When you press the accelerator pedal, you override the set speed and gap distance. Use the accelerator pedal normally to intentionally exceed the set speed limit. When you override the system, the green indicator light illuminates and the vehicle image does not appear in the information display.

The system resumes operation when you release the accelerator pedal. The vehicle speed decreases to the set speed, or a lower speed if following a slower vehicle.

Changing the Set Speed

Ford Fusion. Overriding the Set Speed. Changing the Set Speed Press and release to increase the set speed in small increments.

Ford Fusion. Overriding the Set Speed. Changing the Set Speed Press and release to decrease the set speed in small increments.

Press and hold either button to change the set speed in large increments. Release the button when you reach your preferred speed.

The system may apply the brakes to slow the vehicle to the new set speed. The set speed displays continuously in the information display when the system is active.

    Setting the Gap Distance

    You can decrease or increase the distance between your vehicle and the vehicle in front by pressing the gap control. Press and release to decrease the gap distance...

    Canceling the Set Speed. Resuming the Set Speed. Automatic Cancellation. Park Brake Application

    Canceling the Set Speed Press and release the button or tap the brake pedal. Note: The system remembers the set speed. Resuming the Set Speed Press and release the button...

    Other information:

    Ford Fusion 2013–2020 Service Manual: Turbocharger. Removal and Installation


    Special Tool(s) / General Equipment Hose Clamp Remover/Installer Materials Name Specification Motorcraft® Metal Brake Parts CleanerPM-4-A, PM-4-B -  Removal NOTICE: The turbocharger compressor vanes can be damaged by even the smallest particles...

    Ford Fusion 2013–2020 Service Manual: Camshaft Position (CMP) Sensor LH. Removal and Installation


    Removal NOTE: Removal steps in this procedure may contain installation details. Remove the engine appearance cover. Disconnect the CMP sensor electrical connector, remove the retainer and the CMP sensor. Torque: 80 lb...

    Categories

    Parallel Parking

    The system detects available parallel parking spaces and steers your vehicle into the space. You control the accelerator, gearshift and brakes. The system visually and audibly guides you into a parallel parking space.

    Ford Fusion. Parallel Parking Press the button once to search for a parking space.

    read more

    Copyright © 2022 www.fofusion2.com