Other information:
System Operation
System Diagram
Item
Description
1
IPC
2
BCM
3
IPC message center display
4
TPMS warning indicator
5
LH front TPMS sensor
6
RH front TPMS sensor
7
LH rear TPMS sensor
8
RH rear TPMS sensor
9
RTM
10
GWM
Network Message Chart
RTM
TPMS Network Input M..
Line Pressure Test
NOTE:
Perform the line pressure test prior to performing the stall
speed test. If the line pressure is low at stall, do not perform the
stall speed test or transmission damage will occur. Do not maintain WOT in any transmission range for more than 5 seconds.
This test verifies the line pressure is within specification.
Remove the 2 bolts and position aside the air..