Ford Fusion Manuals

Ford Fusion: Refueling / Refueling System Warning (If Equipped)

Ford Fusion 2013–2020 Owners Manual / Fuel and Refueling / Refueling / Refueling System Warning (If Equipped)

If the fuel tank filler valve does not fully close, a message could appear in the information display.

Ford Fusion. Refueling System Warning (If Equipped)

If the message appears, do the following:

  1. Stop your vehicle as soon as it is safe to do so and switch the engine off.
  2. Shift into park (P) or neutral (N).
  3. Apply the parking brake.
  4. Fully open the fuel filler door.
  5. Check the fuel tank filler valve for any debris that may be restricting its movement.
  6. Remove any debris from the fuel tank filler valve.
  7. Fully insert a fuel pump nozzle or the fuel filler funnel provided with your vehicle into the fuel filler pipe. This action should dislodge any debris that may be preventing the fuel tank filler valve from fully closing.
  8. Remove the fuel pump nozzle or fuel filler funnel from the fuel filler pipe.
  9. Fully close the fuel filler door.

Note: The message may not immediately reset. If the message continues to appear and a warning lamp illuminates, have your vehicle checked as soon as possible.

    Refueling Your Vehicle

    WARNING: When refueling always shut the engine off and never allow sparks or open flames near the fuel tank filler valve. Never smoke or use a cell phone while refueling...

    Fuel Consumption

    Advertised Capacity The advertised capacity is the maximum amount of fuel that you can add to the fuel tank after running out of fuel. Included in the advertised capacity is an empty reserve...

    Other information:

    Ford Fusion 2013–2020 Owners Manual: Emission Law


    WARNING: Do not remove or alter the original equipment floor covering or insulation between it and the metal floor of the vehicle. The floor covering and insulation protect occupants of the vehicle from the engine and exhaust system heat and noise...

    Ford Fusion 2013–2020 Service Manual: Clockspring. Removal and Installation


    Removal NOTE: Removal steps in this procedure may contain installation details.   WARNING: Turn the ignition OFF and wait one minute to deplete the backup power supply. Ignition must remain OFF until repair is complete. Failure to follow this instruction may result in serious personal injury or death in the event of an accidental deployment...

    Categories

    Power Door Locks

    The power door lock control is on the driver and front passenger door panels.

    Ford Fusion. Power Door Locks

    Unlock. Lock.

    read more

    Copyright © 2022 www.fofusion2.com